SecurityMan SM-GSMDialer - Manual (Page 11)

10
Power
The Power socket is used to provide power to the SM-GSMdialer. Please
insert the supplied AC Power adapter to the socket located below the
backup battery on/off switch on the back of the GSM dialer.
Backup Battery ON/OFF
The Backup Battery ON/OFF switch is used to enable (ON) or disable
(OFF) the SM-GSMdialer to run of the internal backup batteries in an
event that the power should go out.
Mounting Holes
The mounting holes are used to mount the SM-GSMdialer to the wall.
NOTE: Please use the supplied “GSMdialer Anchor Guidance” card for
accurate positioning.
Cable Management groves
The cable management groves are used to secure and hold the cables
in place.
SIM Card Slot
Insert your pre-paid or contract SIM card into the SIM Card Slot (face
up) with the gold contacts of the SIM card facing the metal contacts of
your SM-GSMdialer.
GSM Antenna
The treaded insert located at the top of the SM-GSMdialer is where the
supplied antenna must be screwed on to.
NOTE: Please extend the 9.5ft antenna cable when necessary to
guarantee the best reception.
TEL OUT
The SM-GSMdialer is equipped with 2 Tell OUT ports.
1. Connects directly to the TEL IN port of your SecurityMan Wireless
Security systems host (SM-8088E/T).