SecurityMan SM-GSMDialer - Manual (Page 13)

TEL OUT
TEL OUT
TEL OUT
TEL IN
SM-GSMdialer Back Panel
Air-Alarm Back Panel
TEL OUT TEL IN
SIM
12
Connect your phone cables from the “TEL OUT” port to “TEL IN” port
of your existing SecurtiyMan Air-Alarm Host (SM-8088E/T). The second
“TEL OUT” port is for another Air-Alarm Host or phone handset as
shown below.
NOTE: Please make sure to run the excess cable through the cable
management groves so that the unit can sit flush on the wall when
mounted. The Air-Alarm Host also has a “TELL OUT” port that can also
be used to connect a telephone handset.
Move the Backup Battery on/off switch to the ON position located at
the back of the GSM dialer. Then connect the provided power adapter to
the Power socket of the GSM dialer and the other end into an electrical
power outlet as illustrated below. Run any excess cables through the cable
management groves so that the unit can sit flush on the wall when mounted.