Protected setup page – AMX Modero NXD-500i User Manual

Page 63

Advertising
background image

Setup Pages and Descriptions

57

NXD-500i 5" Wall/Flush Mount Touch Panel with Intercom

Protected Setup Page

The Protected Setup page (FIG. 42) centers around the properties used by the panel for proper
communication with the NetLinx Master. Enter the factory default password (1988) into the password
keypad to access this page.

The elements of the Protected Setup page are described in the table below:

FIG. 42

Protected Setup page-showing default values

Protected Setup Page Elements

Back:

Saves the changes and returns to the previously active touch panel page.

Connection Status icon:

This visual display of the connection status allows the user to have a current
visual update of the panel’s connection status regardless of what page is
currently active.
• A Lock only appears on the icon if the panel has established a connection

with a currently secured target Master, requiring a username and password.

Device ID:

Number: Opens a keypad that is used to set and display the current device
number.
Name: Opens a keypad that is used to set and display the current device
name.

Options:

Allows selection of various touch panel features:
• The Function Show button enables the display of the channel port and

channel code in the top left corner of the button, the level port and level code
in the bottom left corner, and the address port and address code in the
bottom right corner (see FIG. 44 for an example of the function locations).

• Use the Page Tracking button to toggle page tracking. When enabled, the

touch panel sends page data back to the NetLinx Master, or vice versa
depending on the touch panel settings.

• Use the Telnet button to enable or disable the telnet server on the panel. This

feature focuses on direct telnet communication to the panel.

• Use the Front Button Setup Access button to activate the grey Front Setup

Access button (located below the LCD) to access the firmware pages.
- Default condition is On.
- Press and hold this grey button for 3 seconds to access the Setup page.
- Press and hold this grey button for 6 seconds to access the Calibration
page.

Provides access to the panel
firmware pages by enabling the

- Setup page (after a 3-second

- Calibration page (after a 6-second

grey front setup access button:

press/hold)

press/hold)

Advertising