Harrington Hoists and Cranes CB Hand Chain Hoist - Manual (Page 32)

32
Figure 6-6 Reeving Assembly
14) For 8 ton capacity and below:
Pull the end of the load chain [47] out between the right guide roller [20] and the load sheave [14]
(no load side) and insert it to the anchorage (stopper) [22]. Insert the stopper pin [23] and fix it with
a split pin [24].

: Make sure the load chain is not twisted and the split pin in the stopper pin is bent
securely.
Figure 6-7 8 Ton & Below Anchorage Assembly