Harrington Hoists and Cranes CB Hand Chain Hoist - Manual (Page 34)

34
Figure 6-9 Pawl & Brake Assembly
18) Wipe out any dirt on the brake surface of the hand wheel [40] and apply machine oil to the
threaded part of it. Screw it on the pinion [17] shaft all the way down.
19) Place the wheel stopper [41] on the head of the pinion [17], insert the wheel stopper pin [42] and
fix it with a split pin [43].

: Never forget to bend the split pin after inserting into the wheel stopper pin.
20) Put the hand chain [48] around the hand wheel [40]. See figure 6-10.
Figure 6-10 Hand Wheel Assembly