Harrington Hoists and Cranes AHM Hoist - Manual (Page 19)

19
Figure 3-6 Diagram for Mini Trolley Installation
3.9.2 Manual Trolley - Follow instructions in Owner’s Manual provided with the trolley.
3.9.3 Motorized Trolley - Follow instructions in Owner’s Manual provided with the trolley.
3.9.4 Hook Mounted to a Fixed Location - Attach the hoist’s top hook to the fixed suspension point.
3.9.5

Ensure that the fixed suspension point rests on the center of the hook’s saddle and
that the hook’s latch is engaged.
3.10 Optional Chain Container
3.10.1 Follow instructions below to install the optional chain container. Refer to Figure 3-7.
1) Insert the Bucket Arm Assembly into the notched openings on the Wheel Housing.
2) Loosely attach the Arm Holders to the Bucket Arm Assembly with the Bolt, Washers and U-Nut
provided.
3) Attach the Chain Container onto the Bucket Arm Assembly with the Socket Bolt BP, U-Nut and
Split Pin. Make Sure to Securely bent the Split Pin.
4) Tighten the Bolt and U-Nut on the Arm Holders.
5) Feed the Chain into the Chain Container beginning with the no-load end. Take care to avoid
twisting or tangling the Chain.
6)

Do not use the Chain Container if any parts are damaged or if any
fasteners/hardware are missing.