Harrington Hoists and Cranes AHM Hoist - Manual (Page 27)

27
4.4 Controlling Hoist Speed
4.4.1 For the cord control, adjust the speed by varying the amount of pull on the cord. Refer to Figure 4-2.
Figure 4-2 Cord, Pendant and Manipulator Control Speed Adjustment
4.4.2 For the pendant or manipulator control, adjust the speed by varying the amount the lever is depressed.
As shown in Figure 4-2, by depressing the lever slightly, you will be able to control the hoist’s motions
slowly and with more precision. By the depressing the lever further, the speed of the hoist will be
increased until the lever is fully depressed.