IAI America ISPDACR-ESD - Manual (Page 67)

59
1
1. Replacement/Adjustment Procedure for Stainless Sheet
“Procedure”
(1) Remove the screws affixing the slider cover.
After removing the slider cover
[1] ISDCR/ISPDCR/ISDACR/ISPDACR (roller structure)
[2] ISD/ISDA/ISPDA (slide structure)
Caution: Remove the slide cover slowly and gently. If the actuator is hung from the ceiling or installed
vertically or sideways horizontally, put a plastic bag, etc., below the slider cover to prevent
the coil springs from getting lost should they detach and fall.
Slider
Slider
Coil spring Coil spring
Roller section
Roller section
Coil spring Coil spring
Sheet retainer
plate
Sheet retainer
plate