IDEC DS2_Series - Manual (Page 3)

DS2 series Instruction manual
2
1.2. Selecting the device
The selection of the correct device version is linked to the detection area needed, which is considered
as the sensitive area height of the device as well as to the maximum operating distance, considered
as the distance between the emitter unit (TX) and receiver unit (RX) and optics interaxis.
Versions are available:
Operating distance Detection field interaxis
DS2-05-07-015-JV
5m
21 beams; h=150mm 6.75mm
DS2-05-07-030-JV 5m 42 beams; h=300mm 6.75mm
DS2-05-07-045-JV 5m 63 beams; h=450mm 6.75mm
DS2-05-07-060-JV
5m
84 beams; h=600mm
6.75mm
DS2-05-07-075-JV 5m 105 beams; h=750mm 6.75mm
DS2-05-07-090-JV 5m 126 beams; h=900mm 6.75mm
DS2-05-07-105-JV
5m 147 beams; h=1050mm 6.75mm
DS2-05-07-120-JV 5m 168 beams; h=1200mm 6.75mm
DS2-05-07-135-JV
5m
189 beams; h=1350mm
6.75mm
DS2-05-07-150-JV
5m 210 beams; h=1500mm 6.75mm
DS2-05-07-165-JV 5m 231 beams; h=1650mm 6.75mm
DS2-05-25-045-JV 10m 18 beams; h=450mm 25mm
DS2-05-25-060-JV
10m
24 beams; h=600mm 25mm
DS2-05-25-075-JV
10m 30 beams; h=750mm 25mm
DS2-05-25-090-JV
10m 36 beams; h=900mm 25mm
The functions characterising the DS2 AREAscan
TM light grids are available on all the versions that
consequently have the same operating modes.
The specific technical characteristics (e.g. resolution, sensitivity etc) remain the same for all the
versions, until differently indicated.
For food industry applications, please verify with DATASENSOR Technical Support the compatibility of
the materials of the light grid shell with the eventual chemical agents that are used in the production
process.