IntelliTrack Inventory Shipping Receiving Picking (ISRP) - Manual (Page 14)

I NTELLI T RACK ISRP CE C LIENT V 8.1
CE Client Guide
2
Introduction
The IntelliTrack ISRP CE Client application is installed on the batch porta-
ble device. The ISRP CE Client application must be run locally from each
batch portable device that is using it. Use the CE Client application to col-
lect data remotely with a batch portable device and then upload the col-
lected data to the workstation application. (ISRP Batch uses a SQL CE
database that integrates with the central SQL server database in the work-
station application.)
IntelliTrack applications use Remote Data Access (RDA) for workstation-
batch communication. RDA encompasses many components and involves
system setup. The following sections go through the ISRP Batch installa-
tion setup process. The procedures vary according to your operating sys-
tem. Please consider your ISRP Batch setup BEFORE installing the ISRP
CE Client application on your portable/handheld devices.
Warning: If Remote Data Access is not properly setup and configured, the
workstation and device will not be able to communicate with each other.
Batch Installation Prerequisites by Operating
System
The steps for completing the IntelliTrack ISRP CE Client Application pre-
requisites differ by operating system:
• Windows 7/Windows Vista: “Batch Installation Prerequisites for Win-
dows Vista and Windows 7” on page 3 .
• Windows Server 2008: “Batch Installation Prerequisites for Windows
Server 2008” on page 6 .
• Windows XP: “Batch Installation Prerequisites for Windows XP/Win-
dows Server 2003” on page 7 .
• Windows Server 2008: “Windows Server 2003 Requirement After ISRP
Installation” on page 8 .