IntelliTrack Package Track User Manual
Page 177
Chapter 9
Using the Handheld
163
from either the Batch Sync Utility or the handheld application until you
change them.
Uploading Data from the Handheld Application
Important: You must register and activate the Package Track application
in order to send handheld application data to the workstation application.
If your application is not registered, you cannot upload data from the
handheld application to the workstation application.
Information for transactions performed on the handheld device including
recipients, packages, and delivery signatures are sent to the Batch Syn-
chronization Utility via the synchronization process. The data synchroniza-
tion process may be initiated from the handheld device or from the Batch
Synchronization Utility.
•
For more information about uploading data from the handheld applica-
tion to the Batch Synchronization Utility, please refer to the following
section.
•
For more information about uploading data to the workstation via the
handheld application, please refer to
“Sending Data to the Workstation
.
Receiving Handheld Data
To receive the data updates from the handheld application with the DMS
Batch Synchronization Utility, please refer to the steps that follow.
1.
From the DMS Batch Synchronization Utility, tap the Upload Data tab
to bring this portion of the utility to the front.