Inter-M HDCC-400 - Manual (Page 26)

A. Press “OK”, and the below screen will be appeared.
B. Select “System Information” on the system menu and change UNIT ID.
C. Select “Camera” on the Device menu. Unit ID should be 1 up to 99. Unit ID is not allowed
number “0”.
D. Set “PTZ Device” and “ID” of the dome camera. Select RS232/RS485 after PTZ is installed,
and then set-up as below table.
RS232/RS485 Baud Rate Parity Data Stop Usage
RS232 9600 None 8 1 Remote Control
RS485 9600 None 8 1 PTZ Control