Inter-M HDCC-400 - Manual (Page 40)

Cancel ESC
Cancels current inputs.
Exits from currently running functions or menu, error status, etc.
Alarm ALRM No Action
Home HOME
Immediately calls Home function.
Deletes selected value or function in programming mode
Call Preset
position
PRST
Pressing Prst will bring up the preset programming menu.
Recalls preset;( e.g.; 1 , 2 … 3 1 … 2 4 0 + PRST )
In the preset or tour programming mode, the operator can review the exiting preset
(selected by cursor) by pressing this key.
Tour TOUR
Pressing TOUR will bring up the tour programming menu directly
Recalls programmed presets or functions sequentially. (e.g., 1 + TOUR)
Pattern PTRN
Pressing PTRN will bring up the pattern programming menu directly.
Repeats the selected pattern of the current dome camera. (e.g., 1 + PTRN)
Auto Scan SCAN
Pressing Scan will bring up the Auto Scan programming menu.
Calls Auto panning function (e.g., 2 + SCAN repeats Auto Scan 2).
Configuration MENU
Enters programming menu.
CTRL+MENU will invoke Keyboard set up menu
Program CTRL
No. + CTRL + PRST will store current view as a preset directly.
No. + CTRL + TOUR will open programming menu
No. + CTRL + SCAN will open programming menu
Control CTRL
CTRL+Joystick : In a programming mode (Preset, Pattern, Scan, Privacy….) the
joystick operates as if in the normal control mode.
While pressing and holding down the CTRL key, all movements of the joystick will
start recording when in the pattern programming menu.
CTRL+Joystick:, In normal operation mode, manual speed of the joystick control
will be operated in turbo mode.
Enter ENTR
Completes entering data for the password or title
ENTR+Joystick : Direction key in DVR remote mode.
Manual Focus Overrides auto focus. Moving the Zoom handle reactivates Auto Focus mode.
Manual Iris Overrides auto iris. Moving the joystick reactivates Auto Iris mode.
Zoom Zoom control.
Joystick
Twist
Up / Down
Left / Right
Zoom control (proportional to position).
Tilt control, Cursor Up / Down in the menu
Pan control, Cursor Left / Right or Page scroll in the menu.
Note: According to camera type, these functions could be different from the description.
Keys for Dome camera:
Key Label Descriptions
Camera
selection
1..16 + CAM Displays the selected camera number.