LevelOne GTL-2691 - Manual (Page 1288)

C HAPTER 43 | LLDP Commands
– 1288 –
lldp med-fast-start-
count
This command specifies the amount of MED Fast Start LLDPDUs to transmit
during the activation process of the LLDP-MED Fast Start mechanism. Use
the no form to restore the default setting.
S YNTAX
lldp med-fast-start-count packets
no lldp med-fast-start-count
seconds - Amount of packets. (Range: 1-10 packets;
Default: 4 packets)
D EFAULT S ETTING
4 packets
C OMMAND M ODE
Global Configuration
C OMMAND U SAGE
This parameter is part of the timer which ensures that the LLDP-MED Fast
Start mechanism is active for the port. LLDP-MED Fast Start is critical to
the timely startup of LLDP, and therefore integral to the rapid availability of
Emergency Call Service.
E XAMPLE
Console(config)#lldp med-fast-start-count 6
Console(config)#
lldp notification-
interval
This command configures the allowed interval for sending SNMP
notifications about LLDP MIB changes. Use the no form to restore the
default setting.
S YNTAX
lldp notification-interval seconds
no lldp notification-interval
seconds - Specifies the periodic interval at which SNMP notifications
are sent. (Range: 5 - 3600 seconds)
D EFAULT S ETTING
5 seconds
C OMMAND M ODE
Global Configuration
C OMMAND U SAGE
◆ This parameter only applies to SNMP applications which use data stored
in the LLDP MIB for network monitoring or management.