Figure 231: adding an oid subtree to an snmp view – LevelOne GTL-2691 User Manual
Page 434
Advertising
C
HAPTER
14
| Basic Administration Protocols
Simple Network Management Protocol
– 434 –
5.
Click Apply
Figure 231: Adding an OID Subtree to an SNMP View
To show the OID branches configured for the SNMP views of the switch’s
MIB database:
1.
Click Administration, SNMP.
2.
Select Configure View from the Step list.
3.
Select Show OID Subtree from the Action list.
4.
Select a view name from the list of existing views.
Figure 232: Showing the OID Subtree Configured for SNMP Views
Advertising