LevelOne VOI-8001 - Manual (Page 38)

38
function. When Enable, the gateway will check the remote caller IP
range setting on
/VoIP Setup/Routing Setup/Authorization/ , if it is
within the authorization, the gateway will allow the call out, but if the
remote caller’s IP is not in the range, it will refuse to call out and
terminate this call.
Index
Area
Code
Auth
Strip Prefix Maximum Minimum From To LineNo RS Verify
CallWaiting
Alert Profile Forward Delete
1 8862 5 4 □
44
Delete
c. Strip: Number of digits will be ignored by user input. For example, if
received VoIP call number is 886212345678 and the STRIP field is setting to
4, the first 4 digits 8862 will be truncated and actually call out number will
be 12345678.
Index Area Code Strip Prefix Maximum Minimum From To LineNo Gatekeeper Alert Profile Forward Delete
1 8862 4
44
Delete
Ex: VoIP Call in number is 886212345678 and real dial out number is
12345678 by strip 4 digits.
d. Prefix: The numbers will be added on the prefix of received VoIP call
number. For examples, if received VoIP call number is 12345678 and the
PREFIX field is setting to 0028862, the actually call out number will be
002886212345678.
Index Area Code Strip Prefix Maximum Minimum From To LineNo Gatekeeper Alert Profile Forward Delete
1 0028862
55
Delete
Ex: VoIP Call in number is 12345678 and real dial out number is
0028862-12345678 by add 0028862 prefix.
Another example, if user VoIP Gateway received a call number 90, STRIP
field is setting to 2, and the PREFIX field is setting to 0,12345678, the
actually call out number will be 0,12345678 ( , mean wait 1 second for PBX
get line for dial out to PSTN, the wait time for one , can be set on
/VoIP
Setup/Line Configure/Line Feature/ ). This example is especially for
speed dial function.