LevelOne VOI-8001 - Manual (Page 6)

6
2.2 Rear Panel
VOI-8001
VOI-8002
VOI-8003
DC12V: For the included power adapter. Be sure to use only the 12VDC/1.6A
power adapter included with the product. Using the wrong power adapter can
damage the product and void the warranty.
Reset: Clear all settings and restore them to the initial values present when
the device was purchased. After performing the reset, make sure to redefine
the IP settings for the device in the ‘Connection’.
WAN: A 10/100 dual-speed Ethernet port fitted with an RJ-45 connector
used to connect the to WAN device (usually a DSL / Cable Modem).
LAN 1~3: Three of 10/100 dual-speed Ethernet port fitted with an RJ-45
connector used to connect the VoIP Gateway to a LAN device.
Phone [P]: Normal RJ-11 phone jacks used to connect analog telephones
and fax machines.
Line [L]: Normal RJ-11 phone jacks used to connect analog phone line or
PSTN (landline)
Note:
Do not place heavy objects on the VoIP Gateway. Placing the VoIP Gateway in a well ventilated
area is very important. Not doing so may cause damage to the unit.