LevelOne VOI-8001 - Manual (Page 12)

1
3.4 VoIP Call Out
User key in the phone number through phone set dial pad, then VoIP Gateway
translate the phone number by the routing table setting here to destination IP & dial
out number then Call out via network protocol
Remark: For Notify remark for this rule. Please use UNDERLINE to
replace the SPACE due to HTTP protocol limitation.
Area Code: Define the Prefix number fit this rule, any phone number
prefix digits matched with the rule will call out by this rule define. Please
Notify there is a compare order rule on this routing table. That mean the
VoIP Gateway will check the rule list from top to bottom one by one, any rule
item matched with the prefix digits that user key in will go to call out directly
no regard to the rest rules below. For Example, if a rule item for area code
8862 is on Index 5, another rule item for area code 886 on Index 6 below
that will be ignored.
Min Digits: The length of the dialed number should not less than this
digits. For example, if the field is entered into ‘3’, the length of the dial
number should be 3 digits at least.
Max Digits: The length of the dialed number should not more than this
digits. For example, if the field is entered into ‘10’, the length of the dial
number should be 3 digits at most.
a. IP Address: Define the destination IP for call out number fit this rule, user
can input below format: