LevelOne VOI-8001 - Manual (Page 56)

5
  Disable Register SIP Proxy server function.
d. SIP Proxy URL: Please input the IP/URL of the SIP proxy server.
e. Port [1~65535]: Port number used for register to server. The SIP
protocol default is 5060, please make sure you have same port number
setting on the gateway and server.
f. Thought Outbound Proxy:
When your gateway is installed behind the firewall or NAT, you maybe
need use Proxy server to relay your call. If so, please input the
Outbound proxy server’s IP here.
g. Prot[1~65535]: Port number used for register Outbound Proxy Server.
h. TTL(Registration interval)[10-7200s]: Some SIP Server need you
set the time interval (seconds) for send the expire signal to register
server keep alive.
i. Domain: Some SIP Server need you input the Domain for register,
please input here.
j. Proxy Require: Some SIP Server (Nortel) need you input the more
information for proxy function, please input here.
k. Line: Number index of lines.
l. Type: Interface type of the line::
 FXO: Analog phone interface for connect to PSTN or PBX extension line
 FXS: Analog phone interface for connect to phone set or PBX Co. line.
m. Remark : Remark for this routing rule. Please use UNDERLINE to replace the
SPACE due to HTTP protocol limitation.
n. Number: Register phone number, Some SIP Server needs this to
parameters for register.
o. Account： Account for register to SIP server.
p. Password: Password for register to SIP server.