LevelOne VOI-8001 - Manual (Page 37)

3
4.2.2.7 VoIP Call In Routing Table Setting
/VoIP Setup/Routing Setup/VoIP Call In/
This page let you define the routing rule for Call in from VoIP. (VoIP Gateway got
a VoIP call required form Network, and then translates the phone number
passed from remote side VoIP Gateway to the real dial out number & line base
on this VoIP Call In routing table). Each time when the VoIP Gateway received a
VoIP call from Network, it will check with Area Code to see which rule matched
to service, if no rule matched, it will refuse to call out and will bound back the
call.
When the VoIP Gateway received a VoIP called from network, it will check below
rules fields then decide line and number to dial out.
a. Area Code: Define the Prefix number this rule service, any VoIP called
from network dialed number prefix digits matched with the rule will call out
to phone by this rule define. Please Notify there is a compare order rule on
this routing table. That mean the VoIP Gateway will check the rule list from
top to bottom one by one, any rule item matched with the prefix digits that
user press will go to call out directly no regard to the rest rules below. For
Example, if a rule item for area code 8862 is on Index 1, another rule below
that like index 2 for area code 886 will be ignored.
Index Area Code Strip Prefix Maximum Minimum From To LineNo Gatekeeper Alert Profile Forward Delete
1 886
46H46H 46H
Delete
2 8862
47H47H 47H
Delete
Be ignored