Staub Electronics WPS-100-DVR-4CH WIREPATH - 4 CHANNEL DVR W_500GB HDD - Manual (Page 39)

39
WPS-100-DVR-4CH Installation and Users Manual
6.4.2 ADVANCED NETWORK SETUP
The Advanced Network Setup allows the administrator to set advanced network parameters use for
connection from remote devices such as PCs and Smart phones. Consultation with the network
administrator may be required for these settings.
,Q1HWZRUN6HWXSSUHVVENTER to display Advanced Network Setup as shown when the highlighted
option is Adv.
To navigate and operate this menu:
 ‡ʆʈʉʇ
Press these buttons on the remote control to select an item.
  $OWHUQDWLYHO\XVHWKHPRXVHWRVHOHFWDQLWHP
 ‡(6&
Press the ESC button on the remote control to escape from this menu and return to the main menu.
  $OWHUQDWLYHO\XVHWKHPRXVHWRH[LWWKHVXEPHQXE\FOLFNLQJRQWKH´Xµ,IWKHFRQWHQWVLQWKLVPHQXKDYH
  EHHQPRGLÀHGDSave dialog box will be displayed requesting the user to save the changes. Press ENTER
  RQWKHUHPRWHFRQWUROWRH[LWDQGVDYHESC to exit without saving. Another method to escape is to use the
  PRXVHWR´ULJKWFOLFNµDQGH[LWWKHVXEPHQX
7KHIROORZLQJLVDEULHIGHVFULSWLRQIRUHDFKLWHPLQWKLVPHQXDQGLWVVSHFLÀFRSHUDWLRQV
Follow the Text Input method described in Section 4.1WRPRGLI\WKHVHLWHPV$OWHUQDWLYHO\XVHWKHPRXVHand
the pop-up keyboard to enter these settings. See the Router Setup document located in the support tab on
the product page for more information on Router Setup and how it relates to these settings.
 ‡&21752/3257
Enter the Control Port for remote access. The default value is 67.
 ‡'$7$3257
Enter the Data Port for remote access. The default value is 68.
 ‡+7733257
Enter the HTTP (web page) port for remote access. The default value is 80.
 ‡:$33,&785(48$/,7<
WAP (Wireless Application Protocol) is a simple standard for remote devices (such as Smartphones) to
access the DVR. Press +/- buttons on the remote control to change the value the WAP picture quality if
WAP access will be required by remote devices. See Section 9.7 for more information on WAP.
 ‡9,'(2675($0
Press the +/- buttons on the remote to change the video quality sent to remote devices such as PCs and
  6PDUWSKRQHV$OWHUQDWLYHO\XVHWKHPRXVHWRFKDQJHWKLVVHWWLQJ,IRecordLVVHOHFWHGWKH'95ZLOOVWUHDP
video at the same resolution as the Record setting (See Section 6.1). Dual Streaming allows for remote
devices to receive lower resolution at higher speeds to the device (see Section 9.4). This is especially helpful
for remote devices on slower network. Reducing resolution sent to these devices will speed up the delivery
  RIWKHYLGHR7RHQDEOH'XDO6WUHDPLQJVHOHFWRQHRIWKHIRXUOHYHOVRIQCIF (Fair is the lowest quality while
6XSHUÀQH is the highest quality). ,I'XDO6WUHDPLQJLVXVHGWKHWRWDOV\VWHPUHFRUGLQJUDWHZLOOEHUHGXFHG
1RWH 7RXVH'XDO6WUHDPLQJLQ,QWHUQHW([SORUHUWKHXVHUPXVWVHOHFWWKHExtra Video Stream option in the
Modify Menu of the Device List (See Section 9.1).