Staub Electronics WPS-100-DVR-4CH WIREPATH - 4 CHANNEL DVR W_500GB HDD - Manual (Page 58)

58
WPS-100-DVR-4CH Installation and Users Manual
8.2.8.1 MODIFY
'95VLQWKH'HYLFH/LVWPD\EHPRGLÀHGXVLQJWKLVPHQX
   7KHIROORZLQJLVDEULHIGHVFULSWLRQIRUHDFKLWHPLQWKLVPHQXDQGLWVVSHFLÀFRSHUDWLRQV
     ‡1$0(
Enter a meaningful name for the DVR.
     ‡$''5(66
Enter the IP address or URL domain name for the DVR.
     ‡&21752/3257
Set the control port for the (DVR) device. The default value is 67 and is auto-populated in menu.
     ‡'$7$3257
Set the data port for the (DVR) device. The default value is 68 and is auto-populated in menu.
     ‡9,'(2675($0
Set the Video Stream to Record to view live video at the same rate as the recording (main) stream.
Or set the Video Stream to Extra IRU´H[WUDµQHWZRUNVWUHDP IRU'XDO6WUHDPLQJ'XDO6WUHDPLQJ
is helpful when viewing a remote DVR over a slow network connection. This allows the DVR to
continue to record as the set rate but reduces the resolution to speed the video delivery to remote
devices. See Section 9.4 for Dual Streaming.
     ‡86(51$0(
Enter the login user name for the DVR. The login name must match a name already set in the DVR.
     ‡3$66:25'
Enter the corresponding password for the login user name. The password must match the
password for the chosen login name already set in the DVR.
     ‡$872&211(&7,21
      ,IWKLVRSWLRQLVHQDEOHGWKH,QWHUQHW([SORUHUXVHULQWHUIDFHZLOODXWRPDWLFDOO\FRQQHFWWRWKH
corresponding DVR to display status messages on the PC screen even if the particular DVR is
not being viewed.