Staub Electronics WPS-100-DVR-4CH WIREPATH - 4 CHANNEL DVR W_500GB HDD - Manual (Page 68)

68
WPS-100-DVR-4CH Installation and Users Manual
8.3.7 VIDEO LOSS
Video Loss Setup DOORZVWKHDGPLQLVWUDWRUWRGHÀQHKRZWKHV\VWHPUHVSRQGVZKHQYLGHRVLJQDOLVORVW
for the camera.
7KHIROORZLQJLVDEULHIGHVFULSWLRQIRUHDFKLWHPLQWKLVPHQXDQGLWVVSHFLÀFRSHUDWLRQV
 ‡ CAMERA
  6HOHFWWKHFDPHUDWRGHÀQHYLGHRORVVWULJJHUHGHYHQWV
 ‡'85$7,21
Set the length of time the buzzer and the corresponding Alarm Out relay will remain triggered once
video loss is detected for this camera. The Buzzer and Alarm Out relay will reset immediately once
video signal is restored.
 ‡&$0(5$72*2
This feature is not available on WPS-100-DVR-4CH.
 ‡*27235(6(7
This feature is not available on WPS-100-DVR-4CH.
 ‡35(5(&25'
  'HÀQHKRZPXFKWLPHWKH'95ZLOOUHFRUGEHIRUHYLGHRORVVLVGHWHFWHG7KH3UH5HFRUG)36VHWLQ
Section 9.3.5 determines the frame rate of this recording.
1RWH $FWXDOSUHUHFRUGWLPHPD\EHVKRUWHUWKDQWKHYDOXHVHWLIWKHWRWDOVL]HRIWKHSUHUHFRUGYLGHR
exceeds the pre-record video buffer.
 ‡$/$50287
This feature is not available on WPS-100-DVR-4CH.
 ‡%8==(5
  %\GHIDXOWWKHLQWHUQDOEX]]HULVHQDEOHGWRVRXQGZKHQYLGHRORVVIRUWKHFDPHUDLVGHWHFWHG
 ‡/2*
  %\GHIDXOWWKH'95ZLOOORJZKHQYLGHRORVVLVGHWHFWHGWRWKH(YHQW/RJ