Staub Electronics ME-560 MOBILEYE - IMPROVED AFTERMARKET COLLISION PREVENTION SYSTEM W_ IOS SUPPORT - Manual (Page 10)

Mode Selection
Turning the Mobileye 560 system OFF/ON
Turning OFF: Press the ( ) button until the EyeWatch Display turns off.
Turning ON: Press any button.
Changing the EyeWatch Display’s Brightness Level:
a. Press ( ) once. All the display icons will appear.
b. Press the (–) (+) buttons to decrease or increase the brightness level.
c. There are 5 available levels (1–5). Mobileye 560 automatically adjusts brightness levels
for day and night.
Changing the Headway Warning Timing:
a. Press ( ) twice. A red car icon will appear.
b. Press (–) to decrease the headway-warning timing; press (+) to increase it.
c. Available levels: 0.1-2.5
Changing Mobileye LDW Sensitivity:
a. Press ( ) 3 times. The right and left lane icons will appear.
b. Press (–) to decrease Mobileye LDW sensitivity; press (+) to increase it.
c. There are 3 available levels (0-2)
Camera Buttons
Turning the Mobileye 5-Series systems OFF/ON
Press and hold the center button on the camera (o).
Volume Control
Press the (–) button repeatedly to decrease volume; press the (+) button repeatedly to
increase volume. There are 6 volume levels (0–5). Note: When the volume is set to zero, the
Mobileye LDW and Mobileye HMW sounds are disabled, but Mobileye FCW sound volume
will default to level "3".
Control Panel (available in the Mobileye 560 system)
CAUTIONS:
1. If you set Mobileye LDW sensitivity to “0”, it will disable LDW alerts.
2. To enable Mobileye LDW alerts, make sure the Mobileye LDW sensitivity level is set to either
level 1 or 2.
Please note that the EyeWatch menu button will be disabled as long as the vehicle's speed
is greater than 0, to prevent the driver from changing system settings while driving.
The volume settings are always enabled, regardless of the vehicle's speed.