Staub Electronics ME-560 MOBILEYE - IMPROVED AFTERMARKET COLLISION PREVENTION SYSTEM W_ IOS SUPPORT - Manual (Page 11)

Changing Mobileye PCW Sensitivity:
a. Press the ( ) 4 times. The pedestrian red icon will appear.
b. Press the (-) to decrease the Mobileye PCW sensitivity, or press (+) to increase it. There
are 3 available levels (0-2).
Enabling and disabling Mobileye IHC:
a. Press ( ) 5 times. The IHC green icon will appear.
b. Press (+) to activate Mobileye IHC; press (–) to deactivate it. There are 2 available modes:
Level 0 means Mobileye IHC is off; Level 1 means Mobileye IHC is on.
Volume Control
Press the (–) button repeatedly to decrease volume; press the (+) button repeatedly to
increase volume. There are 6 volume levels (0–5).
Note: When the volume is set to zero, the Mobileye LDW and Mobileye HMW sounds are
disabled, but Mobileye FCW sound volume will default to level “3”.
Mute
Option 1: Set volume level to “0”, from the EyeWatch Display.
Option 2: Press and hold the (–) button on the EyeWatch Display for 1.5 seconds.
To exit Mute, press (+).
Note: The mute mode will be active until the system is turned off. Following system initial-
ization, the system will return to the preset volume.
Virtual Bumper Sensitivity (VB)
To change the Virtual Bumper sensitivity, press and hold the (+) button, and then press the
(–) button for 1.5 seconds. A red car icon will start flashing and the numerical display will
light. Press (–) to decrease VB sensitivity, or press (+) to increase it. VB sensitivity is limited to
distances between 1 meter and 2 meters.
The settings control panel is also available in Mobileye’s 560/550 Smartphone
application (for further information please see the application user manual online at
www.mobileye.com/mobilapp).