Teka VTC B ES - Manual (Page 27)

27
lower part of the hob. Silicone should not
be applied between the glass and the
unit worktop because if it becomes
necessary to remove the hob from its
position, the glass could break when
trying to detach it.
Position the clips as shown in the diagram,
fastening them to the openings in the lower
part of the body using the screws provided.
For worktop thicknesses of 30 mm. or less,
use the self-tapping screws that are provi-
ded as a fastening accessory - put them
into the clip’s round hole. This hole will be
threaded as the screw is inserted into it,
and this should be done before fixing the
clip to the worktop.
Connecting the electricity
Before connecting the hob to the electric
mains, check that the voltage and fre-
quency of the mains matches what is
shown on the hob’s rating plate, which is
located lower down, and on the guarantee
certificate or, where appropriate, the tech-
nical datasheet supplied, which should be
kept together with this manual.
The electric connection is made via an
omnipolar switch or plug where accessi-
ble, which is suitable for the intensity to be
tolerated and which has a minimum gap of
3 mm between its contacts, which will
ensure disconnection in case of emer-
gency or when cleaning the hob.
The connection should include correct ear-
thing, in compliance with current norms.
Avoid that the cabling remain in contact
with neither the casing of the hotplate nor
that of the oven.
Joining the hob to the oven
1 Disconnect the electricity.
2 Partially place the oven in its position.
3 Plug in the connection(s) between the
cooker and the oven (see fig. 3 e 4) to
connect both appliances. Make sure
the connectors fit completely in its
sockets and the intersection haven’t
caused the exit of any of the termi-
nals. To check this, pull slightly the
cables, one by one, making sure they
have all kept in.
4 Finish inserting the oven into its definiti-
ve position.
Rear view of the oven.
ES models:
40 mm
20/30 mm
fig. 2
fig. 3
Self-tapping screw for 20
and 30 mm thick worktops
Sealing joint
Sealing joint
GB