Accton Technology EN2024-6 - Manual (Page 14)

Print Server User’s Guide
8
Do NOT modify the following lines:
beginCMD
9002:
4. Save the file.
5. Double click the icon for PSTool.
6. Click the Printer submenu and choose
Download Postscript File. A panel will
appear with a list of files.
7. Click the CONFIG file. Then click
Download.
AppleTalk Settings
When editing the CONFIG file, only the
parameter should be changed. The
parameter is the last part of the line, after the colon (:). Ensure that you use only
valid
parameters.
0001 Device Name: SCxxxxxx
The default name will be in the form SC followed by 6 digits. This can be
changed, but the new name MUST NOT exceed 19 characters in length.
3000 Apple Zone: *
The default value “*” allows all AppleTalk zones to access the Print Server’s
printers. To restrict access to a particular zone, enter the zone name here.
3001 Printer Type (P1): LaserWriter
3002 Printer Type (P2) LaserWriter
3003 Printer Type (SP): LaserWriter
3004 Printer Type (P3) LaserWriter
These are text fields, used to describe the printer driver used for each port.
P1, P2, P3 refer to the parallel ports, while SP refers to the Serial Port The
name can be up to 19 characters long.
3101 AP_PCOMM1: No
3102 AP_PCOMM2: No
3103 AP_PCOMM3: No
3104 AP_PCOMM4: No
These settings determine whether the port uses ASCII or Binary
Communication Protocol. Enter NO for ASCII or YES for Binary. The lines
refer to the following ports.
3101 AP_PCOMM1: Parallel Port 1
3102 AP_PCOMM2: Parallel Port 2
3103 AP_PCOMM3: Serial Port
3104 AP_PCOMM4: Parallel Port 3
In choosing which Protocol to use, consider the following points.
•
Binary communication is twice as fast as ASCII
•
ASCII communication is more reliable
•
The computer, Print Server and printer MUST all be configured to use the
SAME protocol. Check your printer manual for details of printer
configuration, and use the
Print menu to configure your computer, so that
they use the same settings as the Print Server.