Accton Technology EN2024-6 - Manual (Page 83)

Management Tools
77
NetBEUI Configuration
Menu equivalent: Configuration - NetBEUI
Selecting this icon leads to the following screen.
Figure 34 NetBEUI Configuration
NetBEUI Settings
Domain name
Enter the designated work group to be serviced by the Print Server. Using
only UPPER CASE is recommended.
Response Time
Sets how fast jobs are sent to the printer. The default value of zero (0) delay
should be increased only if your printer cannot cope with no delay.
Abort Job As Paper Out
YES will terminate the current print job when a printing error is
encountered. NO (default) will try to continue but may cause print errors. If
errors occur, try setting this value to YES.
Normally, there should be no need to adjust these settings.