Accton Technology EN2024-6 - Manual (Page 28)

Print Server User’s Guide
22
NetWare - Specific Settings
Novell Remote Printer Mode
Device Name
Enter either the default name SCxxxxxx or the new
name of the Print Server.
Novell Printer Server
for P1, P2, P3 & SP
Enter the name of the NetWare print server to service
the Print Server’s P1, P2, P3 and SP ports.
Frame Type
Select the frame types used by your network. (Ethernet
802.2, Ethernet 802.3, Ethernet SNAP, and Ethernet II)
Novell Print Server Mode
Device Name
Use the default name SCxxxxxx or the new name of the
Print Server. The new name MUST NOT exceed 19
characters, nor contain any spaces.
NDS Tree Name
NetWare 4.X NDS mode only. Enter the file servers
NDS tree name (root name).
Print Server NDS
Context
NetWare 4.X NDS mode only. Enter the Print Server
NDS Context. The entry should contain the path to the
context but not the context itself and each OU should
be separated by a period.
Example: department.company
Master file server
(Bindery mode only)
Enter the name of the Print Server’s master file server.
Polling Queue
Interval
Defines how often the Print Server will poll the queues
to be serviced.
Job Notification by
Connection ID
Set to Y
es to receive a job notification at only the
workstation where the print job originated,
No to
receive a job notification at all workstations that you
have logged on.
Frame Type
Select the frame types used by your network. (Ethernet
802.2, Ethernet 802.3, Ethernet SNAP, and Ethernet II)
NetWare Password
The password on the NetWare Print Server. The device
needs this password to connect to NetWare.