Accton Technology EN2024-6 - Manual (Page 29)

Novell NetWare
23
Service Additional NetWare Bindery file servers
If your Print Server is configured as a NetWare Print Server and you want it to
service more than one bindery file server, perform the following steps.
1. Login, with supervisory rights, to the other file servers you want your Print
Server to service.
2. Create queues and a print server name for your Print Server on each file server
you want to service.
3. Login, with supervisory rights, to the master file server of your Print Server.
4. Run PCONSOLE.
5. Select
Print Server Information, then select your Print Server in the print server
list.
6. Select
Printer Server Configuration, then select File Server To Be Serviced.
7. Insert the file server names of the other file servers to be serviced by your Print
Server.
8. Reset the Print Server
Attach to more than one NetWare Print Server
In NetWare Remote Printer mode, if you want each port of the Print Server to attach
to a different NetWare Print Server, perform the following steps.
1. Use PCONSOLE to create and assign the required printers and queues as detailed
in the
Remote Printer Mode section.
2. Run PSCONFIG and select
Set to NetWare Remote Printer Mode. Enter the
correct NetWare print server names in the print server name fields, then select
Execute Setup.