Accton Technology EN2024-6 - Manual (Page 78)

72
Chapter 8
Management Tools
This chapter describes the general-purpose management
tools provided with your Print Server.
Your Print Server is shipped with a variety of software programs to assist you to
configure and manage the device and printers attached to it. Software which is
specific to a particular platform is discussed in the relevant chapter. The general-
purpose management programs explained in this chapter are as follows.
Program LAN Protocol Operating System SNMP I.P. C.P.
Wpconfig AppleTalk, Novell,
TCP/IP, NetBEUI Win 3.1 No No No
BiAdmin AppleTalk, Novell,
TCP/IP, NetBEUI Win 95, Win NT Yes Yes Yes
WebAdmin AppleTalk, Novell,
TCP/IP, NetBEUI Win NT Server
+ Browser Yes No Yes
I.P. - Internet Printing Configuration.
C.P. - Configure Printer
Please note the following restrictions:
•
Internet Printing and SNMP are supported only on model EP3003 CheetahPrint
Power-3003.
•
WebAdmin is supported only with EP3003 CheetahPrint Power-3003.
BiAdmin
This section covers the installation and operation of the BiAdmin management
program. This program will run only on Windows 95 or Windows NT.
Installation
1. Insert the supplied CD-ROM into your drive.
2. Run the Setup program in the Utility\Biadmin directory.
3. Follow the on-screen instructions to complete the installation process.
Main Screen
When run, Bi-Admin icon, the program searches the network for all active Print
Servers, then lists them on screen. See the example screen below.
8