Teledyne LeCroy Summit T24 PCIe Multi-lane Protocol Analyzer User Manual User Manual
Page 105
Advertising
Summit T24 PCI Express Multi‐Lane Protocol Analyzer User Manual
93
Probe Settings
Teledyne LeCroy
Figure 5.50: Auto Configure Dialog
The calculated CTLE values are automatically displayed in the relevant lane field. Click
Save to save the settings or click Save As Default to save the settings as the default. Click
Load to save the settings as a .rec file as a PE Tracer Recording option to be used at a later
time. Click Reset to clear the settings (see
Figure 5.51 on page 94
).
Advertising