Teledyne LeCroy Summit T24 PCIe Multi-lane Protocol Analyzer User Manual User Manual
Page 74
Advertising
Teledyne LeCroy
Recording Rules Overview
62
Summit T24 PCI Express Multi‐Lane Protocol Analyzer User Manual
Figure 5.16: Defining New Events
There are three steps to creating a recording rule:
1. Select events.
2. Place the events in the Global State or Sequence cells.
3. Assign actions to the events.
Note:
There are limits to the types of rules that can be created.
1. Click
and select one or more events from the menu (see
Figure 5.17
on page 62
). Selecting an event automatically places it in the Available Events area.
This repository area serves as a parking lot where you can place event buttons
without them having any effect on the Analyzer.
Figure 5.17: New Event
Advertising