Teledyne LeCroy TA660СА - Manual (Page 121)

TA660 User's Manual Catalyst Enterprises, Inc
115
Filtering Captured Data
Filtering feature permits you to modify an existing *.smp data files to
include or exclude a set of user defined patterns. This modification is
saved into a new file.
To perform filtering you must first define the patterns that you wish to
use for filtering. The patterns are defined as mnemonics.
For a complete discussion of other applications of Mnemonics, see
Mnemonics on page 123.
To define a mnemonic for filtering, click on the Mnemonics icon
on the menu bar or select Mnemonics from the Configuration
dropdown list on the menu bar.
To define a mnemonic for filtering, double click a NAME# to open
an Event name dialog box. Select and enter a unique name (e.g.
YOUR_NAME) for the search pattern that you wish to define.
Complete the filter parameter definition by clicking on the
appropriate parameters for that name to open the corresponding
dialog box and entering the desired settings.
Figure 104 Mnemonics Setup for Filtering
To filter a previously sampled data file click Tools on the menu
bar and then select Filter Data . . . to open the Filter Data dialog
box as shown in Figure 105.