Filter descending packets from trace highlight bar, 4 selectable filter options for sas – Teledyne LeCroy Sierra M6-1 SAS_SATA Protocol Analyzer User Manual User Manual
Page 168
Teledyne LeCroy
Navigation + View Toolbar
166
Sierra M6‐1 SAS/SATA Protocol Analyzer User Manual
Figure 3.85: Third Level of Multilevel Filtering
Filter descending packets from trace highlight bar
If you check the Filter descend packets if ascend packet is filtered checkbox, the
application will only filter onward from the highlighted trace selection bar.
If you uncheck this option, the software only filters the filtered packet. For example, if
this option is checked and any SCSI command is selected, all transport and link packets of
this command are filtered. If you unchecked this option, only selected SCSI commands
are filtered.
3.5.4
Selectable Filter Options for SAS
The SAS Filter Options are:
Command Data Pattern
Bus Condition
Primitive
Incomplete Frames
Address Frames
SSP Frames
SMP Frames
STP Frames
SCSI Commands
Task Management Functions