Stp frame pattern, Fis types (sas and sata) – Teledyne LeCroy Sierra M6-1 SAS_SATA Protocol Analyzer User Manual User Manual
Page 63
Sierra M6‐1 SAS/SATA Protocol Analyzer User Manual
61
Protocol Errors
Teledyne LeCroy
Register Device to Host
Set Device Bit
DMA Activate
DMA Setup
BIST
PIO Setup
Data
Any Type
STP Frame Pattern
Double‐click STP Pattern to open the STP Pattern selection dialog.
Figure 2.24: SATA: STP Pattern Dialog
The STP Pattern dialog opens with the default FIS Type as Register Host to device. To
choose another available FIS Type, click the down arrow next to the FIS Type list box.
Choose FIS Type and complete the corresponding dialog.
FIS Types (SAS and SATA)
If you select STP Frame (SAS) or FIS Pattern (SATA) for the Pattern, the FIS Pattern window
displays (see
). You can select the FIS Type in this window from
among the following types.
Register Host to Device