Teledyne LeCroy QPHY-USB User Manual
Page 22
Advertising
22
QPHY-USB Operator’s Manual Rev F
The following image shows a USB device (camera) connected to the SQ Device section of the test fixture (left),
while the host cable is connected to input J24 (right).
Figure 16. USB camera connected to the Signal Quality section
Step 2 - Connects the 2 SMA cables between the oscilloscope and the test fixture:
Figure 17. Step 2 of 4: Probe Hookup
USB Device
Under Test
Power Supplied
from USB Host
From USB Host
Advertising