Teledyne LeCroy SDA III-CompleteLinQ - Manual (Page 12)

SDAIII-CompleteLinQ Software
LaneScape Comparison Mode
When multiple lanes are enabled for display/analysis, the oscilloscope activates LaneScape Comparison
mode. In this mode, waveforms and views for each lane are placed in separate frames, which you can
arrange into different "LaneScapes" to facilitate analysis. Waveforms and views are synchronized
between LaneScapes.
Selecting a LaneScape Mode
When multiple lanes are enabled, the Comparison Mode selector is displayed at the far right of the appli-
cation menu bar.
Touch the icon or text to open the selector to choose a LaneScape mode.
LaneScape Modes
You can choose from three LaneScape modes:
Single - One LaneScape is displayed, allowing maximum screen area for viewing the analysis of a single
lane. If multiple lanes are enabled, tabs for each lane/frame appear above the grid; select the tab for the
frame you wish to display in the LaneScape.
10 921143 Rev A