TREND NBOX(B)TMNE, G, H - Manual (Page 7)

NBOX(B)TMNE, G, H Trend Modem Node Controller Installation Instructions TG200729 Issue 2, 07/01/2009 7
Installation Instructions NBOX(B)TMNE, G, H
1.4 Installation - Configuration
(continued)
Plug in SIM Card 10 (TMNG only)
a Obtain SIM Card
b Plug in SIM Card
1 Contact a GSM service provider. (In UK Trend recommend
O2 or Orange.)
2 Obtain a GSM data enabled SIM card with a data number
(9600 bps) in addition to the normal voice number. (For O2
or Orange stress Mobile Terminator Data SIM required; if
O2 also stress analog data number required.)
3 Communications with an /ADL require the SIM card to
have a 2400 bps data number.
4 Request the GSM service provider to activate the SIM end
to turn off automatic SIM updates.
5 Clear the SIM’s default password by plugging into a mobile
phone and selecting security clearance from the menu.
(Alternatively, to maintain password, set up ‘Additional
init string’ in modem module, see 1.4 step 22.)
Note that plugging in the SIM card will result in some of the
modem settings being cleared: they must be reconfigured
as in 1.4 step 25
12 Switch on
Replace Cover 11 (if appropriate)
Close Flap 14 Set Battery Links On
if NBOXB
13
ON
OFF
ON
OFF
15 Check Node Controller
Check input
power supply
TMN Faulty
b (watchdog)
(red)
a (power)
(green)
Note: Batteries must be charged for 16 hours
before they will support unit during input
power supply failure
O
I
J1
3
J1
3