Vestil CART-S-FR - Manual (Page 2)

This product is a hydraulically powered lifting device
mounted on wheels. The lifting platform lifts by the
action of the scissor arms. The product is designed to
be manually positioned and operated, and to lift
goods of no more than the rated capacity in total
weight at any one time.
BEFORE USE OF THE TABLE:
~ This booklet should be read thoroughly;
~ This booklet should be passed to the safety officer to keep for
future reference;
~ Any supplied test certificates should be passed to those
responsible for your register of lifting equipment and be retained
for scrutiny by a factory inspector, insurance company etc;
~ Familiarized yourself with the table.
SAFETY
:
N.B. This table has been built to EN 1570 and is accompanied by a
Test Certificate. It should be read and kept in a safe place as you
may be asked to present it by your insurance company or factory
inspector.
This table has been designed to give:
~ 30mm gap between the scissor arms to reduce risk of trapping;
~ 50mm gap between the scissor arms and the frame to reduce
risk of trapping;
~ A safe descent speed governed by an oil flow control cartridge in
the ram (even if the hydraulic hose is accidentally cut the table will
still descend at a safe speed);
~ Automatic stop lowering even if the pedal is released.
Only authorized personnel should be allowed to operate this
table.
Please see section entitled USAGE for instructions for safe
usage and warnings against possible misuse.
It is dangerous to work under the platform when raised.
The
table is designed for maintenance whilst in the fully lowered