Vestil CART-S-FR User Manual
Page 8
2. Assemble the handle (Part No.3-1) (see Figure 2);
● Loosen the bolt and nut;
● Insert the bolt into the holes of the handle and chassis, then
fasten them by nut.
WARNINGS:
DO NOT work underneath the platform when raised.
DO NOT overload the table.
DO NOT exceed the load distribution limits (see USAGE section).
DO NOT adjust the overload valve.
DO NOT remove warning labels.
DO NOT invert the table or put it on its side.
DO NOT jack with the platform hinged open.
ALWAYS check for damage before use.
ALWAYS apply the brake when stationary.
ALWAYS ensure people are clear of the table before lowering.
ALWAYS beware that fingers could be trapped when raising or
lowering.
ALWAYS ensure table is fully secure during maintenance as it may
fall knocked or moved.
ALWAYS take care when handling heavy loads.
ONLY AUTHORISED PERSONS SHOULD BE ALLOWED TO
OPERATE THIS TABLE.