Vestil CART-S-FR - Manual (Page 5)

The notice: “DO NOT OVERLOAD” must be provided in positions
where overloading is possible.
USAGE:
Summary:
This product is a mobile scissor lift table, designed to lift goods of
no more than the rated capacity in weight, and to be pushed only
when fully lowered. This table is designed for use indoors and on a
smooth level surface.
General Instructions:
N.B. Care must always be taken when handling heavy loads or
moving a loaded table and especially if over a poor surface.
When manually handling loads the appropriate manual handling
procedures must be adhered to. Failure to do so can result in
serious injury.
Loading the platform:
This table is designed to:
~ in one case lift half the rated load distributed over half the length
of the platform;
~ in another case lift a third of the rated load distributed over half
the width of the platform.
It is the responsibility of the user and operator to ensure that this
loading is not exceeded and that the load being lifted by the scissor
table is sufficiently secure as not to fall during operation of the table.
The load should be secured to table if lifting above 2000mm.
Raising the platform:
Raise the platform by repeatedly operating of the foot pedal.
N.B. The brake must be applied prior to raising the table.
Lowering the platform:
Lower the table by pressing and holding the lowering pedal. (The
oil flow control cartridge ensures that the designed descent is not
exceeded irrespective of the load.) The operator must ensure
that nothing and no person is in the way of the platform or the
scissor arms.