Ampro Corporation P/N 5001795A REV A User Manual

Page 9

Advertising
background image

Chapter 1

ReadyPanel Setup

ReadyPanel

User’s Guide

5

Figure 1-3. Flat View of ReadyPanel I/O Panel

Table 1-2. I/O Panel Connectors, Controls, and Indicators

Control/Connector

Description

DC Power In

This 6-pin connector accepts input from the external DC In cable adapter.

VGA

Use this standard 15-pin (DB15) connector for the video connection. This connector
resides on the ReadyBoard.

Mouse/Keyboard

This 6-pin single PS/2 mouse and keyboard connector resides on the ReadyBoard.

USB 0 & 1

These standard USB connectors reside on the ReadyBoard.

LAN 1 (Ethernet 1)

This 8-pin (RJ45) Ethernet port is used for the 10/100BaseT Ethernet connection and
resides on the ReadyBoard.

COM 1& COM 2
(Serial 1 & Serial
2)

Use these two this 9-pin (DB9) serial ports for the standard RS232 connections to the
ReadyPanel. These connectors reside on the ReadyBoard.

AUDIO: Line Out

Use this audio out connector for standard stereo out connection from the ReadyPanel.

Power LED

This green power-on indicator, shown in

Figure 2-1 on page 10

, resides on the

ReadyBoard and glows when power is turned on and goes dark when the ReadyPanel
power is turned off.

Storage Activity
LED

This yellow activity indicator, shown in

Figure 2-1 on page 10

, resides on the

ReadyBoard and flickers when IDE or compact flash card activity occurs in the
ReadyPanel.

Reset Button

Press this reset button, momentarily, to reset the ReadyPanel (hard reset). This button
resides on the ReadyBoard.

Compact Flash
Cover and Slot

This compact flash cover and slot (not shown) protects the compact flash card if
installed, and ensures good EMI shielding for the ReadyPanel.

Compact Flash
Socket (not shown)

The compact flash socket is provided on the underside of the ReadyBoard and
accepts the compact flash card through the compact flash slot.

NOTE

If you wish to connect a Hard Disk Drive (HDD) Floppy Disk
Drive (FDD) or CD-ROM to the ReadyPanel, you can use one of
the USB ports to connect the device.

USB 0 (top), USB 1 (bottom)

Compact Flash

VGA

10/100 Ethernet (LAN 1)

Mouse/Keyboard

Power LED

Reset Button

Serial 1 (COM1)
Serial 2 (COM2)

Storage Activity LED

Audio Line Out

DC Power In

Advertising