IEI Integration IOVU-572M - Manual (Page 19)

IOVU-572M Panel PC
Page 12
3.1 Anti-static Precautions
WARNING:
Failure to take ESD precautions during installation may result in
permanent damage to the IOVU-572M and severe injury to the user.
Electrostatic discharge (ESD) can cause serious damage to electronic components,
including the IOVU-572M. Dry climates are especially susceptible to ESD. It is therefore
critical that whenever the IOVU-572M or any other electrical component is handled, the
following anti-static precautions are strictly adhered to.
ƒ Wear an anti-static wristband: Wearing a simple anti-static wristband can
help to prevent ESD from damaging the board.
ƒ Self-grounding: Before handling the board touch any grounded conducting
material. During the time the board is handled, frequently touch any
conducting materials that are connected to the ground.
ƒ Use an anti-static pad: When configuring the IOVU-572M, place it on an
antic-static pad. This reduces the possibility of ESD damaging the
IOVU-572M.
3.2 Unpacking Precautions
When the IOVU-572M is unpacked, please do the following:
ƒ Follow the anti-static precautions outlined in Section 3.1.
ƒ Make sure the packing box is facing upwards so the IOVU-572M does not fall
out of the box.
ƒ Make sure all the components shown in Section 3.3 are present.