2 rs-232/422/485 selection, Figure 4-4: serial device connector – IEI Integration IOVU-572M User Manual
Page 26
Advertising
IOVU-572M Panel PC
Page 19
Figure 4-4: Serial Device Connector
Step 2:
Secure the connector
. Secure the serial device connector to the external
interface by tightening the two retention screws on either side of the connector.
Step 0:
4.3.2.2 RS-232/422/485 Selection
To select RS-232, RS-422, or RS-485 mode, please follow the directions below.
Step 1:
Select "Start > Programs > IEI > IEI CEUTILITY.exe" to run IEI_CEUTILITY.exe
Step 2:
Change serial port mode setting
. Use the drop down menu in Figure 4-5 to
select the desired mode setting.
Advertising