Figure 4-16: iovu-572m panel opening (mm), Figure 4-17: panel mounting clamp – IEI Integration IOVU-572M User Manual
Page 36
Advertising
IOVU-572M Panel PC
Page 29
the overall size of the frame that surrounds the IOVU-572M but just large
enough for the rear panel of the IOVU-572M to fit through (see Figure 4-16).
Figure 4-16: IOVU-572M Panel Opening (mm)
Step 12:
Slide the IOVU-572M through the hole until the frame is flush against the panel.
Step 13:
Insert the panel mounting clamps into the pre-formed holes along the edges of
the chassis, behind the frame.
Figure 4-17: Panel Mounting Clamp
Step 14:
Tighten the screws that pass through the panel mounting clamps until the plastic
caps at the front of all the screws are firmly secured to the panel (Figure 4-18).
S
te
p
1
4
:
Advertising