2 panel mounting, Figure 4-15: secure the iovu-572m – IEI Integration IOVU-572M User Manual
Page 35
Advertising
IOVU-572M Panel PC
Page 28
Figure 4-15: Secure the IOVU-572M
4.4.2 Panel Mounting
The IOVU-572M can be mounted in a panel.
CAUTION:
When mounting the IOVU-572M take care to tighten the retention
screws or bolts until fully secure, but do not over tighten. Over
tightening the retention screws or bolts may cause them to become
stripped, rendering them useless.
To mount the IOVU-572M into a panel, please follow the steps below.
Step 10:
Select the position on the panel to mount the IOVU-572M.
Step 11:
Cut out a section from the panel that corresponds to the rear panel dimensions
of the IOVU-572M. Take care that the panel section that is cut out is smaller than
Advertising