Alliance Laundry Systems F232182R1 - Manual (Page 22)

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Programming
F232182 20
p. The motor rotates clockwise (forward) at
normal wash speed for 60 seconds. The
display alternately flashes “nor
n
” and “For”.
q. The display begins alternately flashing “drAI”
and “For” (drain step, cylinder rotating at
wash speed). The motor continues to rotate
clockwise (forward) at normal wash speed for
several seconds.
r. The motor accelerates to distribution speed.
The display alternately flashes “drAI” and
“dISt” (drain step, cylinder rotating at
distribution speed).
s. The drain opens between 15 and 27 seconds
into the drain step. The water level indicator
lights on the display will begin to go out, one
by one, as the machine drains past each water
level.
t. The computer does not monitor the balance
signal from the AC inverter drive.
u. The cylinder accelerates to low spin speed.
The display shows “SPn1” (cylinder rotating
at low spin speed). The basket rotates at low
spin speed for 60 seconds.
v. The cylinder accelerates to medium spin
speed. The display shows “SPn2” (cylinder
rotating at medium spin speed). The basket
rotates at medium spin speed for 60 seconds.
w. The cylinder accelerates to high spin speed.
The display shows “SPn3” (cylinder rotating
at high spin speed). The basket rotates at high
spin speed for 60 seconds.
x. All outputs are turned off for roughly
90 seconds. The display shows “SdLY” (spin
coast delay).
y. The computer performs the normal stop
routine.
The door interlock is energized (allowing the
door to be opened), provided that the water
level switch indicates that water has fallen
below low level and that the AC drive
indicates that the motor has stopped.