MoJack John Deere XD Lift - Manual (Page 20)

20
STEP 21
Rotate Crank Handle to Storage position
• Push in side of handle and rotate from operating position to
the storage position. Allow to seat into the locked position.
THE MOWER LIFT IS NOW READY FOR STORAGE OR TRANSPORT.
Operating Instructions
STEP 22
Folding the jack
• Pull and rotate Tower Locking Pin 90 degrees to the
unlocked position.
• Raise the Tower out of the Base by pulling up on the
Lift Handle and then lower the Tower.
• Secure the Tower by rotating Tower Locking Pin until
the ring drops into locking slot.
Tower Locking Pin
(locked position)
Tower Locking Pin
(unlocked position)