Otter Outdoors XT650 Bench Seat - Manual (Page 3)

4. Attach sled brackets to the rear main tube using the 5/16 x 2 ½ bolts, washers and
nylock nuts.
5. Turn bench over from left to right. and align it on the sled as shown. The brackets and
the main support tube should line up on the edge of the sled,
Attach the bracket
with the long leg
to the left side.
Bracket should
stick outside of
the tube.
Attach
bracket with
the short leg
to the right
side.
with washers on
each side and
nylock nut.
Bracket with short
leg aligns here and
support tube aligns
here.
Align bracket
here and support
tube here.